T R A N S M I T T E R

TRANSMITTER D2012P

The wall-mounted transmitter D2012P is designed for sending information from sensors and PLCs. The comprehensive safety features of the system allows for it to be used as a wireless machine stop. The rugged signal inputs are suitable for different voltages, making it ideal for industrial applications.

Comprehensive safety
The transmitter continuously sends information to the receiver using a digitally verified protocol unique to Datek. In the event of even the smallest error arising the receiver will immediately (<0.5 seconds) revert to a safe stop

mode. Each Datek transmitter is assigned a unique ID code, ensuring that any given transmitter can only activate its own dedicated receiver. No other transmitters or products can ever activate a Datek system.

Rugged signal inputs
The transmitter has 12 digital signal inputs that can be customized for different voltages, both VAC and VDC. The input signals and electronics of the transmitter are separated by relays that protect the electronics. The relays and connection terminals are socket mounted making the installation and maintenance easy.

Flexible outputs
The receiver units from Datek are available in many different versions supporting various serial protocols as well as traditional digital outputs.

  • Wireless interface between PLCs, sensors and machines
  • The use of a unique digital protocol and verification by double processors ensures safety
  • Rugged signal inputs suitable for different voltages
  • Flexible outputs either by serial protocols or relays
GENERAL INFORMATION
Dimensions180 x 180 x 80 mm
Weight1,1 kg
Temperature range- 25° – 70° C
Protection classIP65
RADIO TRANSMISSION
Frequency406 - 470 MHz
Output power10 mW
Range> 100 m
DIGITAL INPUTS
Number1 - 12
Voltage (Ordered from factory)12/24 VDC or 48/110/230VAC
SUPPLY VOLTAGE
Direct current12 – 24 VDC
Alternating current230 VAC

<h3>DOWNLOADS</h3>